¿Qué son las vías ciegas y enterradas?
Vías ciegas: cuando solo un lado de las vías está en la capa exterior de la PCB, se denominan vías ciegas.
Vías enterradas: cuando ambos lados de las vías están enterrados en la capa interna de la PCB, se denominan vías enterradas.
¿Cómo se crean las vías ciegas y enterradas?
Los siguientes tres métodos pueden crear vías ciegas y enterradas:
Perforación mecánica con profundidad fija.
Laminación y perforación secuencial.
Cualquier capa de laminación y perforación.
¿Qué es el proceso de fabricación ciego?
En primer lugar, hablamos del taladro láser mediante agujeros ciegos. PCB ciego mediante el proceso de fabricación de la siguiente manera:
1) terminar primero todas las capas internas;
2) laminar dos capas exteriores de lámina preimpregnada y de cobre sobre las capas interiores ya terminadas de la placa PCB;
3) taladre la vía ciega de profundidad controlada en la PCB mediante láser.
Tenga en cuenta que la precisión es muy importante para los ciegos a través de la almohadilla.
En cuanto a los orificios de vía ciega con perforación mecánica, tomamos PCB de 4 capas con vías ciegas en la capa 1 a la capa 2, por ejemplo, el proceso es el siguiente:
1) produzca las capas 1 y 2 como una PCB estándar de 2 capas, por lo que habrá taladros en las capas 1 a 2;
2) lamine dos placas centrales juntas para obtener la PCB de 4 capas y taladre los orificios pasantes del revestimiento;
3) cuando la PCB está terminada, obtienes PTH de las capas 1 a 4 y vías ciegas de las capas 1 a 2.
¿Cuáles son los beneficios de utilizar vías ciegas y enterradas?
Los beneficios de utilizar ciegos y enterrados se detallan a continuación:
Reducir el tamaño y el peso de la PCB.
Reducir el número de capas.
Reducir los costos de producción de varios tipos de PCB al combinar más funciones.
Mejora de la compatibilidad electromagnética
Incrementar las características de los productos electrónicos.
Hacer que el diseño funcione más fácil y rápido
¿Cuáles son los desafíos de utilizar vías ciegas y enterradas?
La miniaturización de los diámetros de las vías ciegas y enterradas impone mayores exigencias a la producción de PCB.
Se necesitan ingenieros con mucha experiencia para diseñar PCB con vías ciegas y enterradas.
Es más difícil ensamblar PCB con vías ciegas y enterradas, ya que siempre tienen almohadillas pequeñas, como las almohadillas BGA.
¿Cuál es la relación de aspecto normal de las persianas?
En el tablero de vías ciegas con perforación láser, la relación de aspecto de vía ciega normal es 1:1.
¿Qué está enterrado vía?
Las vías enterradas en PCB son orificios entre las capas internas. Tomamos una placa de circuito de vía ciega/enterrada de 6 capas, por ejemplo: las vías ciegas pueden pasar por los orificios de las capas 2-3, 2-4, 2-5, 3-4, 3-5 y 4-5.
Vía enterrada vs vía ciega
La vía ciega y la vía enterrada son PCB HDI de uso común, siempre existen al mismo tiempo en placas de circuito impreso de alta densidad y alta tecnología. Pero son tipos de vías totalmente diferentes.