Çfarë është Rogers PCB?
Nga emri i tij, ne mund të kuptojmë lehtësisht se çfarë i referohet. Siç u përmend më parë, PCB-të e Rogers janë PCB të bëra nga materialet Rogers. Llojet e materialeve më të përdorura janë: Rogers 4350B, Rogers 4003C dhe Rogers 3003.
Çfarë lloj tabelash qarku Rogers janë të përshtatshme për aplikime me frekuencë të lartë?
Rogers Company është prodhuesi kryesor në botë i materialeve PCB me performancë të lartë të përdorura në bordet e qarqeve të printuara me mikrovalë dhe RF. Pra, pothuajse të gjitha llojet e bordeve të qarkut të printuar Rogers janë të përshtatshme për aplikime me frekuencë të lartë.
Kur bëhet fjalë për përdorimin e PCB-ve në zonat me lagështi të lartë, çfarë do të rekomandonit?
Materialet PCB me përthithje të ulët lagështie rekomandohen gjithmonë kur bëhet fjalë për përdorimin e PCB-ve në zona me lagështi të lartë, siç është Rogers PCB. Materialet e Rogers mund të sfidojnë mjedise të tilla dhe kanë avantazhin e të qenit rezistent ndaj kimikateve, lagështisë dhe temperaturës së lartë dhe kanë forcë të madhe të lëvores, duke lejuar që bordet e qarkut me frekuencë të lartë të funksionojnë fuqishëm.
Çfarë është bordet e qarkut Rogers FR4?
Pllakat Rogers FR4 janë bordet e qarkut të printuar që prodhohen si nga materiali Rogers ashtu edhe nga materiali FR4. Në mënyrë tipike, do të ishin PCB me një shtresë me materiale Rogers në shtresat e jashtme. RO4350B, RO4003C dhe Rogers3003 përdoren zakonisht në këtë lloj qarqesh.
A janë bordet e qarkut të printuar Rogers më të mirë se bordet e qarkut FR4?
Është e vështirë të thuhet se cila është më e mirë. Kjo varet nga aplikacionet. Për pajisjet me mikrovalë dhe RF, bordet e qarkut të printuar Rogers janë padyshim më të mira. Por materiali FR4 ka gjithashtu avantazhet e tij si besueshmëria dhe kostoja e ulët.
Çfarë lloj materiali merrni për prodhimin e pllakave të qarkut të printuar?
Lloje të ndryshme materialesh përdoren sipas kërkesave të ndryshme të prodhimit të PCB-ve. Për shembull, materialet FR-4 janë materialet më të përdorura për PCB-të e zakonshme ndërsa materialet Rogers si Rogers 4350 dhe Rogers 4003 janë të nevojshme për PCB-të me frekuencë të lartë.
A ofroni kohë të shpejta kthimi për pllakat e qarkut të printuar të prodhuar nga materiali Rogers?
Po, ne mund të ofrojmë Rogers PCB me kthesë të shpejtë. Ne do të bëjmë çmos për të përmbushur kërkesat tuaja dhe do të ofrojmë produkte Rogers PCB sipas dëshirës tuaj. Ne kemi gjithmonë një sasi të Rogers RO4350B dhe Rogers RO4003C në magazinë.
A janë PCB-të Roger të përshtatshme për aplikime hapësinore?
Po, PCB-të e Rogers janë të përshtatshme për mikrovalë hapësinore dhe aplikime RF, dhe materiali Rogers është një nga më të mirët në këtë fushë.
Cilat janë disa nga llojet e fletëve kur bëhet fjalë për veshjet metalike për Rogers PCB?
Elektrodepozuar
Të mbështjellë
Petë rezistente
Veshje metalike turshi/trajtuar e kundërt e elektrodepozituar
A kujdeseni për bordet e qarkut të printuar me porosi Rogers?
Po, ne mund të ofrojmë PCB me porosi Rogers sipas kërkesave tuaja. Llojet e materialeve të përdorura zakonisht janë RO4350B, RO4003C dhe RO3003. Ju lutem mos ngurroni të punoni me ne. Ne do t'ju ofrojmë produkte të cilësisë së lartë me çmime të arsyeshme. Mezi presim t'ju shërbejmë!
Cilat janë disa ndryshime kryesore midis materialeve të serive Rogers RO4000 dhe RO3000?
Seria RO4000 ofron performancë më të lartë, por me një kosto premium krahasuar me serinë RO3000. Dallimet kryesore:
RO4000 ka një konstante dielektrike më të ulët për përgjigje më të mirë të frekuencës së lartë.
RO4000 ka humbje më të ulët për integritet optimal të sinjalit.
RO4000 përmban kontroll dhe qëndrueshmëri më të mirë të rezistencës.
Seria RO3000 është më e optimizuar me kosto për aplikacionet komerciale.
RO4000 ofron opsione më të larta të përçueshmërisë termike.
RO4000 përmban një CTE më të vogël të boshtit z për besueshmëri të shtuar.
Si të shmangni ndërhyrjet me frekuencë të lartë në PCB?
Komponentët me frekuencë të lartë duhet të pozicionohen në atë mënyrë që të kenë gjurmë sa më të shkurtra. Kondensatorët e shkëputjes (ose të anashkalimit) duhet të vendosen sa më afër që të jetë e mundur me çdo kunj të fuqisë së komponentëve aktivë, duke reduktuar kështu pikat e rrymës gjatë ndërrimit të sinjalit dhe shmangien e kthimit në tokë.
Çfarë është PCB me frekuencë të lartë?
PCB me frekuencë të lartë është një lloj PCB i krijuar posaçërisht për të punuar me sinjale me frekuencë të lartë në intervalin që fillon nga 1 GHz e lart. Është bërë nga materiale me frekuencë të lartë dhe përdoret në shumë pajisje që kërkojnë transmetim të shpejtë, të besueshëm, efikas dhe të ulët të sinjalit me izolim elektrik të vazhdueshëm. Në përgjithësi, PCB-të me frekuencë të lartë përfaqësojnë një pikë zhvillimi në teknologjinë moderne të komunikimit si 5G, komunikimi pa tel (WIFI), sistemet e radarëve, frekuencat radio me mikrovalë, sistemet satelitore dhe pajisje të tjera elektronike shumë të avancuara në fushën mjekësore dhe ushtarake.
Çfarë është PCB me frekuencë të lartë dhe avantazhet dhe aplikimet e tij?
PCB-të HF përcaktohen nga konstanta dielektrike më e ulët (Dk), faktori më i ulët i shpërndarjes (Df) dhe nivelet e ulëta të zgjerimit termik. Ato përdoren rregullisht për teknologjinë HDI. Ato përdoren gjithashtu gjerësisht në komunikimet me shpejtësi të lartë, telekomunikacionin dhe teknologjinë e mikrovalëve RF.
Si të parandaloni që një sinjal me frekuencë të lartë të shkaktojë probleme në PCB-në tuaj?
Teknika të tilla si avionët e ndarë, vizat e qepjes dhe tokëzimi me yje mund të përdoren për të reduktuar sythe në tokë dhe për të siguruar shtigjet e duhura të kthimit të sinjalit. Duke krijuar aeroplanë tokësorë të fortë dhe me rezistencë të ulët, projektuesit mund të reduktojnë në mënyrë efektive zhurmën dhe të përmirësojnë performancën e qarqeve me frekuencë të lartë.
Si e ruani integritetin e sinjalit në një PCB?
Një rregull i thjeshtë është të drejtoni shtresa të njëpasnjëshme në kënde të drejta me njëra-tjetrën. Përdorimi i planeve tokësore për të izoluar shtresat e ndjeshme është gjithashtu praktikë e mirë për ruajtjen e integritetit të sinjalit. Zhurma e furnizimit me energji elektrike është një konsideratë kryesore dhe kërkon dizajn të kujdesshëm.
Cilat janë aplikacionet tipike të Rogers PCB?
Antenat statonike të bazës së mikrovalës me mikrovalë dhe përforcuesit e energjisë, bojërat P2P me pika mikrovalore, radarët dhe sensorët e automobilave me radiofrekuencë: etiketat e identifikimit (RFlD), LNB për satelitët e transmetimit të drejtpërdrejtë.
Si mund të zgjedh materialin RF PCB?
Kur përpiqemi të zgjedhim materialin RF PCB, gjëja më e rëndësishme është të sigurohemi që konstanta dielektrike (DK) dhe faktori i shpërndarjes (DF) të materialit mund të plotësojnë kërkesat e frekuencës elektromagnetike të pajisjeve tuaja. Gjithashtu, duhet të zgjedhim materialin më të përdorur, si Rogers RO4350B, RO4003C, Panasonic MEGRON 6, MEGTRON 7 etj.
Si të filloj me dizajnin RF PCB?
Së pari ne duhet të dimë funksionin dhe përdorimin e aplikacioneve tuaja. Së dyti, ne duhet të hartojmë një diagram. Së treti, ne gjenerojmë skedarë Gerber për fabrikimin e PCB-ve dhe një listë BOM për montimin e PCB-ve. Së fundi, një analizë e plotë e materialit RF PCB është një domosdoshmëri dhe do të ndihmojë për të marrë pajisjet tona me cilësi të lartë dhe çmime konkurruese.
Cili është diapazoni i frekuencës së një PCB?
Gama e frekuencës së një PCB mund të variojë nga 0 HZ në më shumë se 300 GHZ. Zakonisht e quajmë atë PCB me frekuencë të lartë nëse diapazoni i frekuencës së materialit PCB është më i madh se 30 MHZ dhe diapazoni i frekuencës më shumë se 3 GHZ është frekuencë super e lartë.
A është materiali faktori më i rëndësishëm për RF PCB?
Po, është. Materiali RF që kemi zgjedhur do të ndikojë ndjeshëm në funksionin e PCB-së sonë RF në aplikacionet tona. Dhe gjithashtu, diferenca në kosto është e madhe për lloje të ndryshme të materialit RF. Prandaj, ne duhet të përdorim materialin më ekonomik për të përmbushur kërkesat tona në frekuencën elektromagnetike.
Cili është ndryshimi midis PCB RF dhe PCB normale?
RF PCB duhet të jetë prej materiali me frekuencë të lartë për të përmbushur kërkesat e transmetimit të sinjalit. Por PCB standarde është bërë nga materiali i rregullt FR4 vetëm për të përmbushur funksionet elektronike pas montimit të PCB.
Cili është ndryshimi midis RF dhe mikrovalës?
RF është shkurtim i frekuencës radio. Të dy RF dhe mikrovala janë frekuencë elektromagnetike me valë shumë të shkurtër dhe gjithashtu frekuencë të lartë. Dallimi kryesor midis RF dhe mikrovalës është diapazoni i frekuencës. Gama e RF nga 30 MHZ në 300 GHZ dhe diapazoni i mikrovalëve nga 1 GHZ në 100 GHZ.
Cili është grumbullimi ideal i PCB-ve RF?
Një grumbullim ideal PCB RF përmban gjithmonë të paktën një mikrovalë dhe dielektrik RF, të tilla si Rogers RO4350, RO4003, RO3003, etj. Për shembull, një grumbullim PCB RF me 4 shtresa mund të jetë: shtresa 1 dhe shtresa 2 është R04350, shtresa 2 dhe shtresa 3 është FR4, dhe shtresa 3 dhe shtresa 4 është RO4350.
Çfarë lloj testimi nevojitet për PCB-të me frekuencë të lartë?
Metodat e testimit të kërkuara për PCB-të me frekuencë të lartë janë si më poshtë.
1. Test elektrik për të hapur dhe të shkurtër
2. Inspektimi i automatizuar optik
3. Testimi i rezistencës së rezistencës TDR
4. Testimi Funksional
5. Testimi i saldueshmërisë
6. Testimi termik
7. Test Shiriti për Solder Maks
8. Peel Test për përçuesit