Good news | Received a patent for a positioning component for high-frequency hybrid pressing PCB

PCB, also known as Printed Circuit Board, is an important electronic part that supports electronic components and serves as the carrier for electrical connections. Due to its use of electronic printing technology, it is called a "printed" circuit board. During PCB processing, it needs to be positioned, but the existing positioning components are not convenient to adjust according to the length and thickness of the PCB, resulting in poor positioning effect. Therefore, Rich Full Joy proposed a "positioning component for high-frequency hybrid pressing PCB " to solve the existing problem.

Rich Full Joy Technical Solution

1.The horizontal plate is driven to move by a fixed rod and a connecting pin. The horizontal plate is connected to the vertical plate through a movable rod and a movable block, achieving the movement of the vertical plate.

2.Connecting the movable pin and telescopic rod to the adjustment plateto achievethe movement of the adjustment plate.

3.The four corners at the bottom of the box are fixedly connected with support legs, and the top of the support plate is equipped with anti slip grooves. The rear side of the box cavity is fixedly connected to a motor, and the output end of the motor is fixedly connected to a fixed rod. The top of the front of the fixed rod is fixedly connected to a connecting pin, and the surface of the connecting pin is movably connected to a horizontal plate. The right side of the inner cavity of the horizontal plate is slidably connected to a balance bar, and the top of the balance bar is fixedly connected to the box. By setting a balance bar, the operation of the horizontal plate is stabilized, so that the horizontal plate can be.

4.The top of the inner wall of the box is fixedly connected with a sliding rod, and the left and right sides of the sliding rod surface are respectively sliding connected to the vertical plate and the adjustment plate. By setting the sliding rod, the operation of the vertical plate and the adjustment plate is stabilized, making it convenient to adjust and achieve the adjustment function.

Rich Full Joy Innovative Points

1.This project solvedthe problem of poor positioning effect caused by the inconvenient adjustment of existing positioning components based on the length and thickness of the PCB.

2.Adopting a modular design makes positioning components easier to install and maintain.

3.Adopting an intelligent control system makes the positioning process more automated and intelligent, reducing operational difficulty and labor costs.

4.By setting the sliding rod, the operation of the vertical plate and the adjustment plate is stabilized, making it easy to adjust.

5.This project stabilizesthe operation of the telescopic rod by setting up a sliding groove and slider, and provides balance support for the telescopic rod. By setting up a balance rod, the operation of the horizontal plate is stabilized, allowing it to remain horizontal.

Issues addressed by Rich Full Joy

1.Solvedthe problem of signal interference caused by unreasonable design of existing PCB positioning components.

2.Solvedthe problem that existing PCB positioning components may generate more heat during operation.

3.Possess high-precision positioning capability to ensure accurate and error free connections between components.

4.Equipped with shielding and isolation functions, ensuring the stability and reliability of high-frequency signal transmission.

5.Sustainable maintenance, reducing maintenance costs and time, and extending the service life of components.