R&D of environmental protection devices for circuit board cleaning

Circuit board is also called high-frequency board, Thick Copper Pcb, impedance  board, ultra-thin circuit board, printed circuit board, etc. Circuit board makes circuit miniaturized and intuitive, and play an important role in the mass production of fixed circuit and optimization of electrical layout. When cleaning circuit board, blowing dust is often used, making it easy to clean dust and dirt on the surface of the board.

However, currently it is not convenient for users to fix the circuit board during dust blowing cleaning, which can easily cause the circuit board to move and shift position during cleaning. This not only affects the effectiveness of cleaning work, but also reduces work efficiency, making it unable to meet the needs of use.

In response to the shortcomings of existing technology, Rich Full Joy has developed an environmentally friendly cleaning device for circuit boards in the field of environmental protection, which has the advantages of easy adjustment and positioning, solving the problem of inconvenient adjustment and positioning.

Rich Full Joy Technical Solution

1.Through the workbench, groove, first motor, first screw, skateboard, connecting plate, first threaded sleeve, limit plate, top plate, second motor, second screw, chute, second threaded sleeve, third motor, soft bristle brush, and positioning bracket, the function of adjusting the positioning size according to the size of the circuit board can be achieved.

2.The integrated circuit board is clamped by the clamping component, and the cleaning solution in the water storage tank is discharged into the water guide plate by the water pump through a hard water pipe. The integrated circuit board is sprayed and washed through the drainage hole on the upper end face of the water guide plate. During the spraying process, the first motor in the clamping component drives the first electric telescopic rod to rotate, and the first electric telescopic rod drives the clamping plate to rotate, which drives the integrated circuit board to rotate. The third motor in the cleaning component can drive the second electric telescopic rod to rotate, and the second electric telescopic rod drives the brush plate to rotate, achieving the cleaning of the integrated circuit board.

3.Adopting an intelligent control system to achieve automation and refinement of the cleaning process, improving the stability and reliability of cleaning equipment.

Rich Full Joy Innovative Points

1.This project can adjust the positioning size according to the size of the circuit board, so as to improve the stability effect when cleaning the circuit board, avoid displacement and sliding during cleaning, and also adjust the cleaning position of the soft bristled brush according to the needs of use, greatly improving the flexibility and convenience of use, bringing convenience to the user's cleaning work and facilitating their use.

2.This project uses the first vertical plate, air-blower, second vertical plate, suction fan, suction duct, outlet duct, dust collection box, and filter screen to achieve a good vacuum effect when cleaning the circuit board. It can not only blow the dust to one side, but also collect the blown dust, reducing the situation of dust flying everywhere. The filter screen can filter the adsorbed dust, improving the cleaning effect and efficiency of the circuit board and further meeting the needs of use.

Issues addressed by Rich Full Joy

1.Solvedthe problem of low intelligence level of existing circuit board cleaning devices.

2.Solvedthe problem of low resource utilization during the operation of existing circuit board cleaning devices.

3.Able toeffectively remove oil, dust, and dirt from the surface of the circuit board, ensuring that the surface of the circuit board is clean and does not affect its normal operation.

4.Able toreduce energy consumption, improve energy utilization efficiency, and reduce energy waste in clean processes.